Using special kits from , SALTREAT DI’s generate ultra-pure water, with extremely low conductivities, that can be used for sensitive applications such as perfumes, glass & aluminum factories, electronics industry .. etc.
Saltreat DI’s are two – bed systems where water passes, successively, through cationic & anionic beds of exchange resins.
SALTREAT Model |
Tank size |
Volume of resin in each bed |
Exchange capacity |
Flow rate |
---|---|---|---|---|
DI-10-25 |
10” x 44” |
25 |
17,675 |
2 – 4 |
DI-10-45 |
10” x 54” |
45 |
31,815 |
4 – 6 |
DI-12-60 |
12” x 48” |
60 |
42,420 |
6 – 8 |
DI-13-75 |
13” x 54” |
75 |
53,025 |
8 – 10 |
DI-14-100 |
14” x 65” |
100 |
70,700 |
10 – 12 |
DI-14-125 |
14” x 65” |
125 |
88,375 |
10– 13 |
DI-21-150 |
21” X 60” |
150 |
106,050 |
13 – 15 |
DI-21-200 |
21” X 60” |
200 |
141,400 |
15 – 20 |
DI-24-300 |
24” X 69” |
300 |
212,100 |
20 – 30 |
DI-30-425 |
30” X 72” |
425 |
300,475 |
30 – 45 |
DI-36-575 |
36” X 72” |
575 |
406,525 |
40 – 60 |
DI-36-700 |
36” X 72” |
700 |
494,900 |
50 – 75 |
The Siata valves used in all SALTREAT DI models are made of high quality ABS material. Configuration of the valves : top – mounted. Siata DI Range
Main features of DI kits :
DI components kit is composed of a fully electronic and automatic controller with activation of regeneration by conductivity set-point. Moreover the kit is composed of one cationic and one anionic non-metallic ABS multi-ways valves
complete with inlet and outlet fittings. Anionic valve is equipped with conductivity probe for the detection of the quality of DI water. Hydraulic valves for regenerant suction, regenerant suction regulators and hydraulic valve for the closure of the outlet are included, as well as a holder for the controller.
Special controller for Demineralization system.
Conductivity check, with automatic, manual, remote regeneration start.
Availables signals: Alarm signal, inhibitions of regeneration in case of external alarm.
Available on demand, for different Power voltages and frequencies